Views:1 Author:Site Editor Publish Time: 2021-05-11 Origin:Site
Cars should strictly abide by the provisions in the main parameters when using the car, and avoid super high and overload, otherwise, when the lifting height or the lifting tonnage exceeds the regulations, serious oil leakage will occur at the top of the cylinder.
1. The support bar on the jack arm should be inserted into the groove of the fixed support point to keep it fixed.
2. When using the jack, it should be placed on the designated support position under the car, otherwise it is easy to damage the car and even cause Injury accident.
3. When turning the rocker arm to support the car, the support bar on the support arm can never slip out of the support point.
4. Rotate the rocker arm until the jack feet are supported on the ground. At this time, ensure that the top feet support the ground in a large area and The ground must be hard. If the ground is found to be soft, a firm pad with a larger area should be placed in advance or flattened. Hard object.
5. Pay attention to the safety balance when receiving the jack.